-

JHD12864E interfacing with Arduino Uno( 128x64 Bit MAp Graphics LCD) :

 
Requirement :
1 ) JHD12864E LCD
2 ) Arduino
3 ) Connecting wires


Aim: Convert and display JPEG image on Graphics LCD as Bitmap image

Step 1 : 
Download and put Glcd library in Documents/Arduino/library folder
GLCD library

Step 2 :
Download BMP-To-LCD software to convert JPEG image to BMP array
BMP-TO-LCD

Step 3:  
Make connection of LCD to Arduino UNO as shown in figure.

Step 4:
 Download any image from internet.

Step 5: Open image in Paint
 

Step 6:
 

Step7 :
  

 

Step 8:

Step 9: 
Click on resize without selecting area

Step 10: 
Save image as 1.bmp 

Step 11 : open Image in BMP-LCD software

And click on Genarate code


Copy that genarated code in Arduino sketch



Step 12: Copy Paste code in bitmaps.h with some modification as shown in below image
 

Main sketch is as shown below image 

You can download it from here Arduino_GLCD_Sketch


If You have any question comment below.

 

Comments

  1. Unknown17 January 2019 at 14:26

    hello sir, i saw this tutorial, but for parallele connection, could you make one for a serial connection where PSB is connected to gnd, thank you

    ReplyDelete
  2. Unknown10 April 2019 at 22:20

    Getting error as Undefined Reference to setup and loop in bitmaps.h Why sir???

    ReplyDelete
  3. kidd3 March 2022 at 11:16

    Hi sir
    i've a 128x64 jhd12864e lcd , i've try ur step by step tuto (nice job by the way thank u) but my screen still stay blue help me plz
    thank u

    ReplyDelete

Post a Comment

Popular posts from this blog

-
Image
Program ESP8266 WiFi module with Arduino IDE: The Arduino IDE software (short for Integrated Development Environment) is the foundation of what has made the Arduino platform so successful. With it, Makers can program a wide range of compatible microcontroller boards using Arduino’s relatively approachable programming language. Behind the scenes, the IDE software translates your instructions into a more complex code required for your board’s specific chip. Aside from generally cleaning up a number of known bugs, the new update introduces a number of new tools and features. One of the useful feature is board manager which allow use to add customized and diffrent board support in Arduino IDE. In this tutorial we are going to add ESP8266 board in Arduino IDE and program it without and programmer simple using RX, TX pin. Required : 1) ESP8266 2) Arduino UNO 3)connecting wires 4) Local wifi router Step 1 : For buy ESP8266 module here amezon link is given Buy ES
Read more