ATTiny85 with OLED Display interfacing and upload custom image in Displa...

-

ATTiny85 with OLED Display interfacing and upload custom image in Display:


Comments

  1. John Smith17 December 2021 at 21:44

    I think this is an informative post and it is very useful and knowledgeable. We provide LCD modules/LCD Displays, Graphic LCM, smart Display LCD, TFT LCM, Custom LCD Module Display, and LCD panels. china LCD Manufacturers.

    tft-lcd display

    ReplyDelete

Post a Comment

Popular posts from this blog

-
Image
JHD12864E interfacing with Arduino Uno( 128x64 Bit MAp Graphics LCD) :   Requirement : 1 ) JHD12864E LCD 2 ) Arduino 3 ) Connecting wires Aim: Convert and display JPEG image on Graphics LCD as Bitmap image Step 1 :  Download and put Glcd library in Documents/Arduino/library folder GLCD library Step 2 : Download BMP-To-LCD software to convert JPEG image to BMP array BMP-TO-LCD Step 3:   Make connection of LCD to Arduino UNO as shown in figure.   Step 4:  Download any image from internet.   Step 5: Open image in Paint   Step 6:   Step7 :       Step 8:   Step 9:  Click on resize without selecting area Step 10:  Save image as 1.bmp   Step 11 : open Image in BMP-LCD software And click on Genarate code Copy that genarated code in Arduino sketch   Step 12: Copy Paste code in bitmaps.h with some modification as shown in below image   Main sketch is as shown below image   
Read more
-
Image
Program ESP8266 WiFi module with Arduino IDE: The Arduino IDE software (short for Integrated Development Environment) is the foundation of what has made the Arduino platform so successful. With it, Makers can program a wide range of compatible microcontroller boards using Arduino’s relatively approachable programming language. Behind the scenes, the IDE software translates your instructions into a more complex code required for your board’s specific chip. Aside from generally cleaning up a number of known bugs, the new update introduces a number of new tools and features. One of the useful feature is board manager which allow use to add customized and diffrent board support in Arduino IDE. In this tutorial we are going to add ESP8266 board in Arduino IDE and program it without and programmer simple using RX, TX pin. Required : 1) ESP8266 2) Arduino UNO 3)connecting wires 4) Local wifi router Step 1 : For buy ESP8266 module here amezon link is given Buy ES
Read more